Product Details
- Sales Rank: #835303 in Automotive
- Size: AECSL100230844
- Color: Silver
- Brand: Ec Pro Tech
- Model: AEC1002316
- Dimensions: 10.24" h x10.24" w x29.53" l,5.95 pounds
Features
- Steps of covering the car hood in 18 seconds,In a strong wind, you can cover your car with it or pack it within 18 seconds.
- Made from Technologically advanced, Outer use composite Polypropylene fabric Waterproof material with protective film, Inner made of soft cotton, better protection of the car.
- The toughness of the car cover is higher than other ordinary ones. It is tough enough to drag a car.
- The left, right and rear sides of the car cover designed to guard against theft. Therefore, your car can be better protected. In the meantime, with such a car cover, your car can guard against wind better
- This high-quality outdoor Car cover provides a great protection from: snow, rain, dust, dirt, mold, mildew, sun. This cover is ideal for high moisture climates including all across the US and Canada.Storage Bag included. 3 Years Warranty
Hyundai Santa-Fe 2007-2013 Car Cover (18 Seconds Fast Cover)
*Steps of covering the car hood in 18 seconds.
1. Take the car hood out, hang it on the outside of the boot, then close the boot.
2. Grasp the operation lever and undo the magic tape.
3. Hold the two operation levers, and unfold the car hood with another hand.
4. Depart the operation levers, and make the lower operation lever drive the car hood drooping naturally.
5. Extend the telescopic rod.
6. Pull the car hood to the front of the car along the flow line of the car's body.
7. Put the telescopic rod on the bottom of the front, and fold the telescopic rod.
8. Collect the car hood by using the lock rope, and then the covering is finished.
*Steps of collecting the car hood in 18 seconds.
1.Unfix the rope locking device, loosen the wind rope.
2.Extend the telescopic rod.
3.Pull the car hood to the back of the car along the flow line of the car's body.
4.Pull the operation lever at the back of the car and combine it with the telescopic rod.
5.Grasp the combined operating lever and the telescope rod and move them closer to the car hood on the top of the car and pull the car hood together towards the back of the car.
6.Make the car hood on the top of the car slide into the slot between the boot and the rods, then repeat it several times, make sure that the whole car hood has slid into the slot.
7.Foist the car hood on the two sides into the slot, too.
8.Stick the rectangular magic tape to the magic tape on the operating lever. Then the collection is finished.
No comments:
Post a Comment